Where to add bleed valve?

Users who are viewing this thread

Dripdrip

New Member
Messages
28
Reaction score
0
Points
1
Location
NE
Hi. My mom has a rough old house, and she didn't have enough heat on the first floor, so I added 3 new radiators by running 3/4 pex on the ceiling. Now the problem is I realized there is probably a lot of air in that pex up high, since it keeps coming down to the rad and then back up and down to the next one.

Should I add two boiler drains to the loop in the cellar and try and blow the air out?

Or maybe just one boiler drain and try and use the bleeder valves on the rads to let air/water out?

Or just let the air sit and keep using only the bleeder valves on the rads?

Thanks!

DD
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks