(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 6 of 6

Thread: Wiring new Panasonic bathroom exhaust vent

Threaded View

  1. #1
    DIY Junior Member
    Join Date
    Oct 2009

    Default Wiring new Panasonic bathroom exhaust vent

    Hi - I am new to this forum and hope you can help me out. I am replacing my old bathroom exhaust vent with a new Panasonic Bathroom Vent (model # FV-08VKS2).

    When i opened up the electrical box on the new vent, it has the following wires: 1 white, 1 black, 1 green, and 2 red. The two red wires are what is confusing me. My current thinking is that the white and black just connect to a simple toggle on/off switch, and somehow the two red wires go to a separate switch that controls the fan's actual speed. Am i on the right track here?

    If so, do i just run new romex (black/white/ground) from a "speed control" type of switch and connect to the red?? What about the ground on that new piece of romex?

    As you can see...i am a bit confused. Any help is VERY much appreciated!

    Last edited by Terry; 05-18-2010 at 02:25 PM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts