With the Unifit, part of that drain path is plastic (the adapter), so you can hear it a little. For me, not a problem. I think the benefits far outweigh the (minor) noise issue some report. It's easier to pull the toilet, too, as the adapter stays in place, and you don't need to reset with a new wax ring (unless you need to remove that, too). This would allow you to quickly and easily remove the toilet to say paint behind it.
With the Unifit system, what holds the front of the toilet in place? I suspect that a screw gets put into those two access ports on the aft base to hold the rear in place.
Last edited by a moderator: