(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: GFCI Outlet change

  1. #1

    Exclamation GFCI Outlet change

    Hi, I have a whirlpool that has limted access to where the plug for the motor is. What I want to do is change the GFCI plug with a normal plug, and make the breaker GFCI. This is so if the circuit trips inadvertently, I can reset at load center. Does anyone know if this is ok? Thanks

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,655

    Default Gfci

    Yes, but still a nuisance to reset if it happens when you are in the tub. I prefer to mount the GFCI "master", (preferably a "dead front, but otherwise a standard GFCI outlet), where it is accessible in the bathroom, and then feed the pump's outlet off the "load" side.

  3. #3
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,412

    Default

    I've had an air tub and a heated towel bar on GFCI CB's for about 5-years now...never had a nusiance trip. Now, if it did occur, it's not catastrophic, just an annoyance, so my thought is go for it. Now, out of sight means that it doesn't get tested as often as it should, but not a huge problem.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  4. #4
    Homeowner Thatguy's Avatar
    Join Date
    Aug 2008
    Location
    MD
    Posts
    1,460

    Default

    Some of these huge fat GF plugs that are fed by thick cords supposedly cannot be removed.

  5. #5
    DIY Member Ford2001's Avatar
    Join Date
    Sep 2009
    Location
    Manchester, Vermont
    Posts
    32

    Default from GFCI rec. to GFCI breaker

    If the GFCI outlet is inside the tub wooden framing, and you have to remove
    an access panel to get the outlet, I think installing GFCI circuit breaker
    is a good idea. So long if don't mind the expense of one, $30.00 and up.

    Then go for it. And don't forget to hire an electrician if your not up
    to the task.
    Last edited by Ford2001; 10-03-2009 at 02:45 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •