(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Old Claw Foottub

  1. #1
    DIY Junior Member
    Join Date
    Sep 2009
    Location
    Honesdale, PA
    Posts
    1

    Smile Old Claw Foottub

    I have inheritied a claw foot tub and am now in the process of re-doing my bathroom with it. I have taken a bunch of coats of old paint, etc off the OUTSIDE of the tub and it is now looking very nice (the inside is fine).

    I would like to seal the outside of the tub with something clear and protective.

    Looking for suggestions you may have to that end. I've gotten a lot of different answers, suggestions etc. I don't WANT to use a color, just something clear. Any suggestions?

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,405

    Default

    You might take it to someplace like an auto refinisher and have them put a clear-coat on it. SHould be fairly tough, look good, and last a long time as it's designed for temperature changes, and moisture. Some of those are REALLY tough, and not the easiest to install without the proper equipment.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •