amacbabe
New Member
I realized about a month ago I had a leaky faucet. One day I went to use my outside water faucet from my well and there was no water.
I did some research and realized I need to pre-prime the pump by adding more water back the opposite way.
My well is only about 7 feet deep- I have 1/2 hp Goulds pump above ground with a Wet-Flo Pre-Pressure water System tank.
After I put more water back in the system I turn on the pump and tuned on some of faucets which were flowing again. The only problem was the pump never turned off- The pressure was about 50-60psi and the pumps continue to be on and also get supper hot-
Don't know if the shut off for the pressure guage is not working or what- please help.
I did some research and realized I need to pre-prime the pump by adding more water back the opposite way.
My well is only about 7 feet deep- I have 1/2 hp Goulds pump above ground with a Wet-Flo Pre-Pressure water System tank.
After I put more water back in the system I turn on the pump and tuned on some of faucets which were flowing again. The only problem was the pump never turned off- The pressure was about 50-60psi and the pumps continue to be on and also get supper hot-
Don't know if the shut off for the pressure guage is not working or what- please help.