Scott99
New Member
- Messages
- 33
- Reaction score
- 0
- Points
- 0
Greetings,
I'm replacing an alcove tub/shower. I've already demo'd the old, squared and plumbed the walls in prep for the tile setup as well as replaced the valve.
I was hoping to find a new tub with the same demensions as the one I removed but am not having any luck. I wanted to do this so I could use the same drain setup.
how would the pros go about installing a new tub and setting up the drain to match? the current drain was set and concrete poured around it(probably for support?) see pictures. should concrete be set around the drain??
My first thought would be to try measuring to set the drain and then cut a access panel in the wall to connect the overflow.
ideas??
thanks
Scott
I'm replacing an alcove tub/shower. I've already demo'd the old, squared and plumbed the walls in prep for the tile setup as well as replaced the valve.
I was hoping to find a new tub with the same demensions as the one I removed but am not having any luck. I wanted to do this so I could use the same drain setup.
how would the pros go about installing a new tub and setting up the drain to match? the current drain was set and concrete poured around it(probably for support?) see pictures. should concrete be set around the drain??
My first thought would be to try measuring to set the drain and then cut a access panel in the wall to connect the overflow.
ideas??
thanks
Scott