(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Plastic Support Insulation on open Ceiling

  1. #1
    I&C Engineer (mostly WWTP) Lakee911's Avatar
    Join Date
    Aug 2005
    Columbus, OH

    Default Plastic Support Insulation on open Ceiling

    If I stapled some plastic to my ceiling rafters (24in o.c.) would that be enough to support R-30 insulation if layed between them? Drywall won't be installed for some time. What is the minimum thickness platic recommended?


  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Cave Creek, Arizona

    Default insulation

    Why aren't you using paper backed insulation stapled to the joists? If you use the proper unfaced insulation it is wide enough so that it has to be pushed into the spaces which usually holds it up, so your plastic would just have to keep it there, not support it.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts