Novice speaking - Purchased and started install of new sink, disposal, faucet. The new sink is deeper than the original. After getting some things in place, there are two issues (maybe more) that I do not know how best to resolve - with the main question being is this DIY work?
1. Drain line going into the wall is at the same level as the disposal discharge tube (see image 1). The drain line going into the wall is about 15" from the cabinet floor to center, and the cabinet floor is about 5" above the finished kitchen floor.
2. The left strainer basket is directly over the slip joint, so I can't just simply put the p-trap back in (see image 2).
Thanks very much in advance.
1. Drain line going into the wall is at the same level as the disposal discharge tube (see image 1). The drain line going into the wall is about 15" from the cabinet floor to center, and the cabinet floor is about 5" above the finished kitchen floor.
2. The left strainer basket is directly over the slip joint, so I can't just simply put the p-trap back in (see image 2).
Thanks very much in advance.