We have two ultramax, one is about 5 years old, the other 1 year. The older one has never had a single issue, but the new one has what I think might be a leak where the flapper and the flange mate together. I think the issue is here as the toilet seems to shut off after a flush then after some random amount of time the fill tube [black line off the valve] will ever so slowly drip until the toilet is flushed and refills and shuts off.
I have pulled the flapper off the old toilet and put it on the newer one, and the issue is almost gone. Swapped them back and the new ever so slightly leaks again. Neither flapper looks bad so I am wondering if there is a defect in the flange the flapper mates to? Or do I have a bad valve? I have played with the shut off heights and it does not seem to change the issue one way or another.
Thanks....
I have pulled the flapper off the old toilet and put it on the newer one, and the issue is almost gone. Swapped them back and the new ever so slightly leaks again. Neither flapper looks bad so I am wondering if there is a defect in the flange the flapper mates to? Or do I have a bad valve? I have played with the shut off heights and it does not seem to change the issue one way or another.
Thanks....