(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 15 of 30

Thread: Kenmore no brine draw

Threaded View

  1. #1
    DIY Junior Member Cruisinfanatic's Avatar
    Join Date
    Sep 2009

    Default Kenmore no brine draw

    Replaced every stinkin seal and o ring on the thing and still can't get soft water. Reason being I guess is because the brine will not draw out. The level says constant, about 9 inches from the top. Sears had me remove the flow plug in the venturi and confirmed that I get good suction.
    But it still won't draw out.
    Must be something with the float assembly even though the float seems to work freely?
    Last edited by Cruisinfanatic; 09-09-2009 at 03:40 PM.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts