Piperca
Member
I am wiring four switches from one source, which will control four separate locations. Since I am feeding all four switches from the same source, is there anything wrong with wiring the switches from the source in this manner?
Obviously, this is just the hot and ground, all neutrals would be tied together and the black to each location would be connected to the switch, also. I'm just trying to reduce the amount of clutter in the box.
Obviously, this is just the hot and ground, all neutrals would be tied together and the black to each location would be connected to the switch, also. I'm just trying to reduce the amount of clutter in the box.
Last edited by a moderator: