Here's my problem. I am finishing up a shower remodel and installed a new Moen Faucet for shower. I'm done tiling and grouting so I was going to caulk around the tub. I know that it's best to fill up the tub before doing so. I turned on my faucet and all I am getting is cold water. When i turn the valve to the hot side it goes off. I'm guessing that it's not opening on the hot side? Would the next step be to remove the cartridge and replace it. I know there is hot water to the valve. I just don't know the next thing to do.
Thanks in advance for any help.