(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: kenmore worth a darn?

  1. #1
    DIY Junior Member in-mn's Avatar
    Join Date
    Dec 2010
    Location
    Minnesota
    Posts
    3

    Default kenmore worth a darn?

    I have moved into two homes in the last decade and put kenmore water systems in them. The first was for a small two bedroom house, the second was for my family home. I bought the best model offered.

    My gripe is that there seems to be a noticeable honeymoon period with these. Then its like after 6 months the resin tanks go bad or become less effective. I have cleaned valves, done iron out, etc, (city water, irons not really a prob, but you never know), but water just seems to feel hard.

    42,300 max grains. Water is around 17-19 gpm (or so). While it is much better than untreated for buildup, we still have hardness deposits on water dispensers, etc.

    It does seem to do a nightly recharge, so perhaps we are using more than its capable of. However, way back when it seemed we did one recharge every 3-4 nights, now its nightly.



    Is this thing just a piece of crap? Setting hardness from 10-25 doesnt change water it seems. Have to do more tests, and hate dealing with sears salesmen. They want to resell me a softener even though i just got from them, so stopped going.


    Suggestions?

  2. #2
    In the Trades Akpsdvan's Avatar
    Join Date
    Dec 2009
    Location
    Alaska
    Posts
    1,471

    Default

    Welcome to the world of cheep from Corp America..
    Where valves are always undergoing a change of some type.

    Sears and the ones just like them really love the upper basket, now it does have it's place but more times than not it is a problem in how well the system will clean.
    Plus it is a reason for a prefilter on their systems, to keep stuff out of that upper basket from getting there in the first place.

Similar Threads

  1. Darn Jacuzzi toilet!!!
    By merryem in forum Toilet Forum discussions
    Replies: 10
    Last Post: 06-25-2010, 01:09 PM
  2. Darn "Flapper" won't shut up!
    By OldPete in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 5
    Last Post: 10-30-2006, 07:17 AM
  3. Measure twice, cut once - darn!!
    By thezster in forum Toilet Forum discussions
    Replies: 6
    Last Post: 07-25-2005, 02:50 PM
  4. Is SanaGloss worth it?
    By Zoinks in forum Toilet Forum discussions
    Replies: 4
    Last Post: 03-14-2005, 07:41 AM
  5. That darn T&P valve!
    By kramocker in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 14
    Last Post: 12-16-2004, 11:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •