Kinetico Sulfur Guard vs. Culligan Iron-Cleer/Gold Softner

Users who are viewing this thread

MarcoPolo

New Member
Messages
6
Reaction score
0
Points
0
looking at other options and want to know if anyone out there has advice for me.

I have a well and in my aread there tends to be high iron, sulfu and manganese.

My well:
3-7 ppm iron (both ferrous and ferric)
3.5 ppm Hydrogen Sulfide
2.0 ppm manganese
7.2-7.5 ph
247 TDS
Some fine/small rust particles or sediment from time to time like sand

My water always looks clear, but at times looks like there many be a faint black tint in the back of the toilet bowls and then eventually looks like it may turn yellow. I have a deep well and the water is never orange or red or anything. No matter what system I have in, and there have been three now and all have had filter cartridges in additon to the softners, the filters only last 3 weeks and then go bad and my water smells bad like metal/blood and rotten eggs.

I dont' know what option there is for me
 
Last edited:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks