(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 7 of 7

Thread: 30 X 60 Tub - Anything Besides Villager or Princeton?

  1. #1

    Default 30 X 60 Tub - Anything Besides Villager or Princeton?

    I have a small NYC 5 X 8 bathroom and need a 30 X 60 alcove tub under 15" high as it's mostly used for showers, and a taller one is too hard to get in and out of as I get older. I'm doing a higher end look, and it's discouraging that these two seem to be my only choice. No room to build a surround.

    Are there any others? Would prefer cast iron, but any material that will hold up 20+ years would also be fine. Any ideas? Thanks!

  2. #2
    DIY Junior Member pmetiv's Avatar
    Join Date
    Oct 2008
    Location
    New York, NY
    Posts
    6

    Default

    We had the same issue and went with the villager. It's probably a better bet then the Princeton since the shape is a bit more interesting.

    If you don't mind having it a bit higher, the Kohler Hourglass comes in 30x60 but is 17in high....it is lower then most Acrylic tub which normally go for 20-22in high.

    Good luck!

    Pierre

  3. #3

    Default

    I don't think acrylic tubs hold up well. Don't they scratch and stain easily? Really want the cast iron. I can't believe there's only one on the market. The Villager is nice but I really don't like that boomerang decoration on the apron. I like the design of the Princeton better, but not the Americast.

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,602

    Default tub

    Why can't you build a surround on either tub? Millions of people have managed to do it.

  5. #5

    Default

    A surround takes up several inches and I don't think I have enough clearance as the toilet is pretty close. I don't even think they make anything as small as 30" wide where you can tile the apron. What is the minimum number of inches that a tiled apron can add to the width of a tub?

  6. #6
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,374

    Default

    Zero...if you build a wall that is recessed the thickness of the tile, once installed, it could end up flush with the edge of the tub.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  7. #7

    Default

    Thanks! Didn't know that. I would prefer some edge thickness though. I think it looks better. I don't know if they make a 30" tub though with no apron at all.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •