Kokopelli
New Member
- Messages
- 8
- Reaction score
- 0
- Points
- 0
Hoping someone can help explain how the overflow is supposed to be installed.
I've dropped in the new tub and can't for the life of me figure out how the overflow pipe should be attached with the gasket and the overflow plate. The hole for the screw is in the middle of the pipe but the supplied screw doesn't reach through the plate and to the hole. If it did fit would it be secured by a nut on the otherside?
And then there's the gasket -- I'm feeling like I'm missing the obvious but where does the gasket go? It doesn't fit inside the overflow plate . . .
Tearing my hair out . . .
K.
I've dropped in the new tub and can't for the life of me figure out how the overflow pipe should be attached with the gasket and the overflow plate. The hole for the screw is in the middle of the pipe but the supplied screw doesn't reach through the plate and to the hole. If it did fit would it be secured by a nut on the otherside?
And then there's the gasket -- I'm feeling like I'm missing the obvious but where does the gasket go? It doesn't fit inside the overflow plate . . .
Tearing my hair out . . .
K.