(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: no cold water

  1. #1

    Default no cold water

    I have a basic Moen single hand faucet in a bathtub less than 5 years old. This tub get used only occasionally. Today there was no cold water from the tub although the sink and toilet worked appropriately. On beginning the tub knob turn a diminished stream of hot water came out where the cold water should have been and the hot section works fine. Any suggestions? MR

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,428

    Default

    I'm not a pro, nor worked on that type. From what I read, though, it sounds like the pressure balance part is stuck. I don't know if taking it out and cleaning it is possible. You might want to check out Moen's website and see if they have diagrams to look over or a troubleshooting section.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •