Terry Loves Bellevue & Kirkland
425-649-5683, Top Rated Plumber 1-877-808-5683
Results 1 to 7 of 7

Thread: All zones turn on

  1. 07-07-2009, 10:27 PM #1
    tbris
    tbris is offline
    DIY Junior Member
    Join Date
    Jun 2009
    Posts
    5

    Default All zones turn on

    When i turn on an individual zone from the control box, all the zones turn on. There are 6 total. All zones turn on as well when I turn on the manual lever on the anti-siphon auto sprinkler valve. Any thoughts as to why this is now occurring?
    Reply With Quote Reply With Quote
  2. 07-07-2009, 10:59 PM #2
    tbris
    tbris is offline
    DIY Junior Member
    Join Date
    Jun 2009
    Posts
    5

    Default Another thought

    I'm also getting flow to all zones with the manual lever turned on with the power supply of the control box disconnected.
    Reply With Quote Reply With Quote
  3. 07-08-2009, 06:58 AM #3
    jimbo
    jimbo is offline
    Moderator and Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,003

    Default

    Sounds like all the zone valves stuck open. Not a likely scenario. Give us some more details of the system, pics of valves, etc.
    Reply With Quote Reply With Quote
  4. 07-09-2009, 07:17 PM #4
    upper
    upper is offline
    DIY Senior Member upper's Avatar
    Join Date
    May 2009
    Location
    Fresno, CA
    Posts
    154

    Default

    New system? Upper
    Reply With Quote Reply With Quote
  5. 07-31-2009, 04:25 PM #5
    puncha
    puncha is offline
    DIY Junior Member
    Join Date
    Jul 2009
    Posts
    1

    Default

    What system are you using?
    sprinkler Thermage Health Articles Pure Natural Soap
    Reply With Quote Reply With Quote
  6. 07-31-2009, 08:32 PM #6
    upper
    upper is offline
    DIY Senior Member upper's Avatar
    Join Date
    May 2009
    Location
    Fresno, CA
    Posts
    154

    Default

    What ever it is it is a very bad deal.Stop the check.......Upper
    Reply With Quote Reply With Quote
  7. 08-01-2009, 02:59 PM #7
    hj
    hj is offline
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    23,531

    Default valves

    If it is a new system all the valves have their manual controls opened. Otherwise you have a lot of bad valves because a good valve, with the manual opener off, CANNOT operate with the power disconnected at the control box.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules