(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Point well help

  1. #1
    DIY Junior Member
    Join Date
    May 2008
    Location
    IL
    Posts
    11

    Default Point well help

    I haven't been on here since June of last year, asking about help with installing a point well. Well I used all the information that was given to me, and it worked out terrific. I was able to core a hole through my basement floor and pound a 1 1/4" point 13 feet down and get great water flow. After "developing" the well like many of you had suggested, I was able to get rid of all sand and silt that I can see. I've been using the point for about 2 months now for watering my lawn and garden, and it's worked great. I hooked it up to a 3/4 hp jet pump then into a 35 gal precharged tank, and it cycles around 3 min and takes about 2 min to fill up the tank again, at full blast. So to those of you who helped me, it's much appreciated.

    Jared

  2. #2
    That's all folks! Gary Slusser's Avatar
    Join Date
    Aug 2004
    Location
    Wherever I park the motorhome.
    Posts
    6,790

    Default

    Thanks for the feedback.
    Gary Slusser Retired (= out of business)
    Click Here to learn how to correctly size or program a water softener.
    CAUTION, as of Nov 12 2013 all YouTube videos showing how to rebuild a Clack valve have an error in them that can cause damage.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •