Gary Slusser
That's all folks!
- Messages
- 6,921
- Reaction score
- 22
- Points
- 38
- Location
- Wherever I park the motorhome.
- Website
- www.qualitywaterassociates.com
That pinhole in the injector may be a partial blockage. Did you find and clean the injector throat under the injector, how about the injector screen?
Put it in the bring cycle and take off the brine line for then take or control valve and put your thumb on the end of the tubing and see if you have good ssuction. If not you have to find the cause.
www.kenmorewater.com to see how a softener works.
Put it in the bring cycle and take off the brine line for then take or control valve and put your thumb on the end of the tubing and see if you have good ssuction. If not you have to find the cause.
www.kenmorewater.com to see how a softener works.