USAFRet
New Member
- Messages
- 16
- Reaction score
- 0
- Points
- 1
Just installed a brand new Aquia III and the water level in the tank is slowly decreasing (about 1/4 inch an hour). I can see water trickling very slowly into the bowl from under the rim. I cleaned the gasket on the flush valve and inspected the valve seat. Both look fine. The gasket on the valve is clear vs black as described in the owners manual, but it looks to be in perfect shape. I've also pulled the tank and checked to ensure the flush valve mount nut is tight - it is. Would appreciate any other thoughts/advice. Thanks!