(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Should I change my cast radiators to baseboard?

  1. #1

    Default Should I change my cast radiators to baseboard?

    I bought a house that has a gas boiler with circulating hot water. It previously was a steam system and I have all of the original cast iron radiators in use with the system. The pipes coming out of the boiler are 2" in diameter and the pipes branching out to the radiators look like they are 1 1/2. I was wondering if it would be worth my while to change all of the piping and swap the radiators for baseboard. My thought was that the amount of water that I have to heat now in the larger pipe is causing my boiler to run more. Has anyone had any experience with making this change? Can anyone let me know what kind of savings I would see if I made the change to 3/4 pipe with baseboard heat? I plan on keeping the house for at least 5 more years and I want to see if spending the money on this upgrade would pay. Thanks!

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,638

    Default heat

    Unless you insulate the piping, 3/4" copper has a much higher ratio of volume to surface area, plus copper is a better heat transferer, so you will get more heat loss with the baseboard. You would probably have to break it down into multiple zones so that 3/4" would be adequate. Other than heat loss from the piping, you are only heating whatever it takes to replace the heat used to warm the rooms. Baseboard may, or may, not heat them more efficiently and if so that might generate some savings. Whether it would be enough to compensate for the cost of the conversion is debateable.

  3. #3
    Extreme DIY Homeowner Scuba_Dave's Avatar
    Join Date
    Jan 2009
    Location
    South of Boston, MA
    Posts
    885

    Default

    I have hot water cast iron radiators & love them
    Compared to baseboard they (seem to?) keep the heat longer & radiate the heat longer. Makes sense since they have a higher mass
    In my new addition I actually plan to add more radiators instead of baseboard
    DIY Handyman (not 4 hire)
    I have enough to do to my own house

  4. #4
    Web Development | HVAC patsfan78's Avatar
    Join Date
    Jun 2009
    Location
    Maine
    Posts
    33

    Default No baseboard

    Baseboard, although fairly economical to install is the least efficient form of hot water heating out there. If you want to replace your cast iron radiators i would consider Steel Panel Radiators. The may cost a little more but you can get more BTU's at lower water temperatures than baseboard. The best things is that you don't take up all of that wall space. Some of the better steel panel radiators are made by a company called Pensotti.

    Good Luck

    Mike
    www.hitechheat.com
    Home Heating Solutions

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •