The Fleck 5600 spec sheet shows any of its versions is not to be used on a softener larger than a 2.0 cuft 12" diameter tank. With up to 55 gpg of hardness, not counting any iron or manganese, a 2.0 cuft softener is way undersized for even a 2 person household UNLESS you want very poor salt efficiency and to have to regenerate it every two to three days.
Andy, can you be more specific when you say things so others, including me don't have to guess at your meaning? Doesn't cheap usually refer to poor quality? To me and most people, it does. Or do you mean 'lower priced' softeners are price wise cheaper than your way overpriced nonelectric and otherwise featureless Kinetico?
You know I'm not Certified and you call me unprofessional, yet again, here you go expecting me to be professional... DUH!
As the wordsmith I know you to be, howsabout you type exactly and clearly, exactly what you mean to say and have others understand you to mean? Nail it down so there is no way anyone, especially me, can misquote you or misunderstand, or think you meant to say something else? And recall what Terry, the owner of the forum, told you about your complaints of me in the past; although you aren't including 'verbal assault', or 'derogative comments and aggressive behavior' now. Here's a copy.
Quote:
I am not sure what is happening here but I am being verbally assaulted by Gary Slusser. I am trying to get to the bottom of patrick88's problem and Gary continues to assail my inquiries with a derogative comments and aggressive behavior.
I am doing my best to ignore such abuse and I am counting on you to moderate and mediate...as is what I feel is prudent and proper.
Please respond here if you would.
Thank you,
Andy
Andy,
You may be a little too sensitive to be here.
.....
So far, I haven't seen anything out of the ordinary here.
Terry Love