So I'm a first time home owner and I've got some minor repairs that I'd like to take care of. After some fiddling around and some basic research of how toilets work I still can't find exactly what I'm looking for so joined up in the hopes that someone here might know what I need to adjust or fix.
Basically my toilet fails to refill all the way when I flush it, causing it to not refill enough for a second flush if need be. Here are pictures before and after flush.
Before:
After
If I simply lift up on the black lever (circled in red) the bowl begins to refill without an issue.
I had tried twisting the refill float attached to the black lever down and up but that seems to just control the water level in the tank. I would presume that I need the water to lift the refill valve up high enough for it to initiate and cause the bowl to refill, but what do I need to adjust to make this happen.
Any help would be greatly appreciated.
Thanks!
Basically my toilet fails to refill all the way when I flush it, causing it to not refill enough for a second flush if need be. Here are pictures before and after flush.
Before:
After
If I simply lift up on the black lever (circled in red) the bowl begins to refill without an issue.
I had tried twisting the refill float attached to the black lever down and up but that seems to just control the water level in the tank. I would presume that I need the water to lift the refill valve up high enough for it to initiate and cause the bowl to refill, but what do I need to adjust to make this happen.
Any help would be greatly appreciated.
Thanks!
Attachments
Last edited by a moderator: