(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 11 of 11

Thread: What is smallest pvc bend?

Hybrid View

  1. #1
    Plumber canton's Avatar
    Join Date
    Jul 2005
    Location
    Massachusetts
    Posts
    66

    Default What is smallest pvc bend?

    I need a 1/32 bend, is it available?

  2. #2
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    A 1/16 th bend ( 22) is the smallest I see in the catalogs.

  3. #3
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,671

    Default bend

    Why do you need such a small angle, and what are you tyring to connect?

  4. #4
    Plumber canton's Avatar
    Join Date
    Jul 2005
    Location
    Massachusetts
    Posts
    66

    Default

    I came off a 4" waste line which was laying @ a angle going out side. I came off the 4" with a 4 x 3 Y then to a 45 but it isn't quite straight due to the 4" slant, I tried the 1/16 bend but its a little off as well. This is all for a basement bathroom, I might be able to make up the difference on the 3" run to the toilet. However I do think if there was a 1/32 bend it would be perfect.

  5. #5
    DIY Senior Member plumguy's Avatar
    Join Date
    Jul 2005
    Location
    MA
    Posts
    192

    Default

    I've never installed 4x3 wye that needed that type of bend! Between rolling the wye and 45's you should be able to get you're angle and maybe installing an ocassional 22 1/2

  6. #6
    Plumber plumber1's Avatar
    Join Date
    Aug 2005
    Location
    Florida
    Posts
    1,423

    Default 32 degree bend

    Right on plumbguy

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •