toro lawnmaster sprinkler timer

Users who are viewing this thread

george moneta

New Member
Messages
2
Reaction score
0
Points
0
I have a Toro Lawnmaster three program electronic sprinkler timer model 53603. One of the two resistors on the printed circuit board (pcb) burned up. I called several Toro Company numbers but no one can help me. My problem is that I either need a schematic of the pcb or someone who has such a model to look at the resistor on the board where it says R14 and tell me the colors on the resistor so that I know it's value. When mine burned up, it discolored the resistor and I can not read any of the colors.


thanks,

George
 

tomm

New Member
Messages
41
Reaction score
0
Points
0
Its your lucky day George

blue,red,black,gold
 

george moneta

New Member
Messages
2
Reaction score
0
Points
0
I appreciate the info. My burned resistor measures 0 ohms. Its so toasted that the first stripe looks black. There is no way for me to have determined its resistance. My pcb is p/n 821801 rev f. Hopefully you had the same board.

Thank you,
George
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks