(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: Gas Gun

  1. #1

    Default Gas Gun

    I have a Carlin G3B gas conversion gun, the problem is sporadic when the unit calls for heat the motor in the gun comes on but sometimes it does not fire. Is there a part that I should check or replace. It does not happen all the time but the motor could run all day without firing. What would cause this

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Cave Creek, Arizona

    Default gun

    The ignitor which lights the flame is not working properly, although most units would test the flame and if it did not fire within a reasonable time, and after a few tries, it would shut the motor down.

  3. #3

    Default Gas Gun

    The motor does not shut down though it keeps running. Since I put the first post up it has been running OK. Any other ideas.

  4. #4
    Master Plumber nhmaster's Avatar
    Join Date
    Jul 2008
    S. Maine


    Call a service tech.

  5. #5

    Default Gas Gun

    I fixed the gun myself once already so I guess I'll try again. Thanks for your suggestions.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts