(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 9 of 9

Thread: Pex Methods

Hybrid View

  1. #1
    DIY Junior Member jafriede's Avatar
    Join Date
    Mar 2009
    Location
    Iowa
    Posts
    12

    Default Pex Methods

    I am going to be installing a water softener in a house I'm buying and will need to re-route some things. I am thinking of using Pex. I found a video on YouTube that showed 6 different methods of putting on ends. The two I'm considering are the crimp ring or the banding clamp. Which is the easiest/reliable? Is there any reason not to get the supplies from Lowes? They carry Zurn products.

    Thanks

  2. #2
    DIY Member wallskev's Avatar
    Join Date
    May 2009
    Location
    North Carolina,USA
    Posts
    72
    Blog Entries
    1

    Default See other post

    I use only the brass fittings and Clamp rings. Does require a tool ( About $100) but have had 0 leeks

    See other post :
    PEX fastener terms -compression ring, crimp,clamp...

    Kevin

  3. #3
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,405

    Default

    My preference is Wirsbo. The tool is not cheap. Pex has memory. With a clamp, it is always trying to loosen. With the compression/expansion Wirsbo uses, it is always trying to make the joint tigher. Do either one right, and it should be sound, but having the extra layer of actually using the memory properties just makes me feel better.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  4. #4
    Plunger/TurdPuncher kingsotall's Avatar
    Join Date
    Aug 2008
    Location
    Flagstaff, AZ Sitting on an upside down 5 gallon bucket next to the GO 68HD
    Posts
    1,260

    Default

    Jim, you are a sage amongst fools.
    I just post cuz I like to see my avatar.

  5. #5
    One who lurks Basement_Lurker's Avatar
    Join Date
    Jun 2007
    Location
    Victoria, BC
    Posts
    668

    Default

    A crimp ring system from a reliable manufacturer has never given me problems. Having said that, the wisbo system is definitely a premium system with a premium price.
    Broken promises don't upset me. I just think, why did they believe me? -Jack Handy


    www.blackbirdkitchenandbath.com

  6. #6
    Radon Contractor and Water Treatment 99k's Avatar
    Join Date
    Aug 2008
    Location
    Fairfield Co.,Connecticut
    Posts
    460

    Default

    The cost of materials and a tool is insignificant if you are a DIY and just cutout the plumbing contractor cost, therefore, go with the best!! Wirsbo is the best choice ... ProPress for the Pro (who can justify a 2K tool).

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •