jdf405
Electrical Engineer
When a toilet is specified as a 12" rough in - does that mean 12" from the unfinished framing to the center of the closet flange or is it measured from the expected finished wall (i.e. 1/2" or 5/8" further out)?
The reason I ask is I frequently see a gap behind toilets of about 3/4" to 1". I realize you need a tolerance in there, but a 1" gap seems excessive.
Thanks for your input!
The reason I ask is I frequently see a gap behind toilets of about 3/4" to 1". I realize you need a tolerance in there, but a 1" gap seems excessive.
Thanks for your input!