(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: powering sprinklers from hose

  1. #1

    Default powering sprinklers from hose

    is there a problem with going from a hose to pvc to sprinklers (hunter pro series 4" pop-up)? one (underground, all pvc) zone can power 7 heads like this but will going from a hose fitting to pvc deminish the psi or gpm normally?

  2. #2
    DIY Senior Member captwally's Avatar
    Join Date
    Apr 2005
    Location
    Florida
    Posts
    102

    Default

    Absolutely! I don't have any of my pressure loss charts handy right now, but you will find that the psi loss per foot on standard garden hose is pretty scary compared to PVC pipe. Your best bet is to run PVC directly to the zone. It's inexpensive and worth it.
    Measure Twice, Cut Once
    Wally

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    First, the hose bibb may only be on a 1/2" pipe, so it does not have the same flow capability as a 3/4" line right off the main.

    Second, the loss in the hose will be significant.

    Third, where is the backflow prevention in this picture?

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,633

    Default hose

    The length of the hose, it probably being coiled up, and its inside diameter, will all combine to reduce the pressure and volume. You might not be able to operate more than a coupld of heads on any one zone doing it this way. In addition, if you are using a hose, it will probably, (and hopefully), be connected to a faucet with an external vacuum breaker, which will further diminish the possible volume.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •