(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Having one valve on with any of seven others

  1. #1

    Default Having one valve on with any of seven others

    I have an irrigated pasture with seven zones. I would like to have an eight zone come on when any of the other seven are on. I have a higher performance pump then i did when the system was designed. This is causing cycling. I have a very large pond that i add water to. A solution for me is to have the pond valve come on when any of the seven pasture valves are on. I can control the pond volume with a gate valve. This can be adjusted to keep the pump running without the cycling. How can i activate this pond valve with the others. I have to electrically isolate the other seven so they dont all come on at the same time. I tried using diodes before the solonoids to prevent back feed. This made 1/2 wave DC which was not enough to activate the valves. They just buzzed. Is there a way to do this without using seven relays with 24 volt AC coils. Thanks

  2. #2
    Sprinkler Guy Wet_Boots's Avatar
    Join Date
    Mar 2007
    Metro NYC


    Why not look into a Cycle-Stop valve, which will allow constant running?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts