phxz06
New Member
- Messages
- 3
- Reaction score
- 0
- Points
- 0
Hi I'm replacing a Delta 600 series shower. I had a real hard time removing the old parts due to corrosion and calcium build up. My problem is that I can't find a part that I had to damage during removal. Its a flange/collar that goes over the housing for the water temp/pressure control ball. I had to cut the old flange/collar off because I could not get a good grip with my channel locks to offer counter support while removing the housing cover (didn't want to shear off the copper lines). I am including a picture of the cut and damaged part. The new parts going in are chrome if that may help with a part number.
thanks steve
thanks steve