Adjust Temperature on a Delta Hot Tub Faucet 1400 Series

Users who are viewing this thread

nateham

New Member
Messages
1
Reaction score
0
Points
0
What do I need to do to adjust the water temperature on this type of hot tub faucet? Right now, the temperature is lukewarm and I need it to be warmer.

Please help.

Nate
 

Gary Swart

In the Trades
Messages
8,101
Reaction score
84
Points
48
Location
Yakima, WA
Go to this site it explains the whole thing.

delta-1400-adjustment.jpg
 
Last edited by a moderator:

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,771
Reaction score
1,191
Points
113
Location
New England
Basically, all new shower valves have a temperature limiting adjustment...it could be a screw, or a bracket or something. It's usually fairly easy to figure out once you get the eschuthion off. the hassle with these is that for safety, between winter and summer, the incoming cold water can vary quite a bit, and if adjusted in the winter, you could get it too hot in the summer and scald a young or old person (whose skin is thinner). that's one reason why I prefer a thermostatically controlled valve over a (minimum requirements) pressure balance and limit stop version.
 
Last edited:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks