42skidoo
New Member
- Messages
- 23
- Reaction score
- 0
- Points
- 0
I hooked up a filter system for drinking water under my sink and installed a separate little tap beside the existing sink taps. I tapped into the main water line coming into my house right at the entry point where it comes through the concrete basement foundation downstairs. First copper line going anywhere is to the drinking water tap. After the drinking water tap I installed a filter and then a water softener. Problem is I'm tasting salt in the drinking water line. Is it possible that I'm pulling water back somehow from the water softener when I turn on the drinking water tap? If so would a simple flapper valve solve this problem?