(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: how to fix a bad diswasher rough in

  1. #1
    DIY Senior Member rockycmt's Avatar
    Join Date
    Nov 2007
    Location
    New York
    Posts
    129

    Default how to fix a bad diswasher rough in

    My fault but how do I fix it.

    I have the outlet for the dishwasher up too high in the wall when it should be at the base of the wall. Plug hits back or unit. Wall is already closed in. I was thinking to cut a new 'old work' outlet below it and pig tail from the old box. And just put a utility plate on the old box.

    What do you think?

  2. #2
    Licensed Electrical Contractor Speedy Petey's Avatar
    Join Date
    Jun 2007
    Location
    NY State, USA
    Posts
    975

    Default

    I think you solved your own problem. Good call.
    That's exactly what I'd do.
    Answers based on the 2008 & 2011 NEC. If you're on the '14 already I feel sorry for you.

  3. #3
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,615

    Default Dw

    Here, because the code calls for either an accessible disconnect or a visible receptacle, usually under the sink, with a removable cord, we do not put the receptacle behind the dishwasher.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •