M3
Member
I have a short run between a toilet and the main drain stack. Are there any rules as to putting a bend in a 3" waste line in close proximity to the main stack and the flange?
I want to move a toilet over 6" to gain more shower space, but I'll have to put a 45 or 60 (pretty sure a 45 will do it) degree turn in about 4" away from the main stack, and then the toilet will only be about 7" away from that 45 degree turn.
I want to move a toilet over 6" to gain more shower space, but I'll have to put a 45 or 60 (pretty sure a 45 will do it) degree turn in about 4" away from the main stack, and then the toilet will only be about 7" away from that 45 degree turn.