tub and shower shutoff key

[chasetigger]

I would like to know if there is such a thing as a shutoff key or wrench i work for an apartment complex and we have tile showers and every time we have to change the stems in the manifold we have to shut down the whole complex to do so and more times than not we end up ripping tiles from the shower wall in order to access the shutoff valves to get visegrip or pliers inside to turn them off

[kingsotall]

What are you going to do when you have to change a stop for the kitchen sink or toilet¿ Same scenario, right¿ Sounds like a main valve for each unit would be the ticket.

[jimbo]

If the shower valves have isolation stops on them, and the tile installers did not leave access , then you have a lousy tile installer. I realize that is ancient history now, and there is no easy answer.

A shower valve which has integral stops has trim which will cover the access to the stop. If you have this situation, you simply have to worry away some tile with a chisel or rotozip for access. The stops usually are screwdriver operated. If this is stripped, or not working, then you have to shut down and repair the stop.

[chasetigger]

the problem is the complex i work for is appr.40 years and most of the valves have been replaced and have the same size star as the stems but are not excessable to the stem handle and do not have the screwdriver slot so i was hoping someone could help me locate a t-handle wrench of some sort

[hj]

A picture would help because your description does not correspond to the way those valves should have been installed.

[chasetigger]

what i really need to know if there is some kind of t-handle wrench or key there is little i can do to question yhe way the tub and tile was put together