Hi
I have a 4 channel watering system which until recently I was running of the municipality water with no problems. We've recently gone ahead and had a Well Point installed (about 12 meters deep pump above ground type). The well point pump unfortunatly doesn't have enough pressure to drive the watering system. I also have a 500litre tank.
I assume to fix the pressure problem I am going to have to either pump the water into the 500litre tank and then use another stronger pump for the watering system or I have heard of pressure tanks but am not understand how these work.
Please can someone help me so that I can use the well water in the irrigation system.
Thanks very much
Newbie
I have a 4 channel watering system which until recently I was running of the municipality water with no problems. We've recently gone ahead and had a Well Point installed (about 12 meters deep pump above ground type). The well point pump unfortunatly doesn't have enough pressure to drive the watering system. I also have a 500litre tank.
I assume to fix the pressure problem I am going to have to either pump the water into the 500litre tank and then use another stronger pump for the watering system or I have heard of pressure tanks but am not understand how these work.
Please can someone help me so that I can use the well water in the irrigation system.
Thanks very much
Newbie