(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: insulation

  1. #1
    DIY Junior Member 7echo's Avatar
    Join Date
    Jan 2008
    Location
    coastal georgia
    Posts
    27

    Default insulation

    I am remodeling a bathroom and will have an acrylic tub. Is it OK to foam(low expansion) the voids in the wall areas of the tub? It will be set on a mortar bed, with poly between the tub and mortar. I am thinking it would be good to insulate the tub wall cavity. I am talking specifically about the area between the inner and outer tub wall, the room walls will be insulated with batts.

    Thanks

  2. #2
    Software Engineer BlackNoir's Avatar
    Join Date
    Mar 2009
    Location
    Centerville, MN
    Posts
    17

    Default

    I was just wondering the same thing.

    Was also wondering if there was a way to insulate a whirlpool motor so it's not so loud?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •