(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 14 of 14

Thread: Please suggest sprinkler pump...

  1. #1

    Default Please suggest sprinkler pump...

    I had a Baldor sprinkler pump for over 15 year, finally it quit.

    I've check HD but don't like the plastic pump. Lowes has an Water Ace, looks like it's all cast iron but I'm not sure if it's any good.

    Was hoping you guys could recommend a replacement pump.

    Are they all the same?

    Thanks..

  2. #2
    Well driller,pump repair. and septic installer Waterwelldude's Avatar
    Join Date
    Feb 2009
    Location
    Texas
    Posts
    303

    Default

    The cast iron pumps, you are more likely to get more life out of. The plastic ones just don't seem to hold up that well.
    Goulds, Jacuzzi and Grundfos, are some pretty good ones.
    I hear that the flint and wally are ok. Can't say for sure never used the f/w pumps.
    Witch ever way you go, go with the cast iron.


    Travis
    "I shall never surrender or retreat" -Col. William Travis


  3. #3
    Previous member
    Join Date
    Jul 2005
    Location
    Riverview, Fl.
    Posts
    4,540

    Default

    Baldor was the motor on your pump.

    I agree with Travis. Plastic is junk and cast iron is better. Big Box stores sell cheap pumps with even cheaper motors on them. Water ace is a Myers with a cheap GE motor on it. Flotec is a plastic Sta-Rite with a cheap motor.

    Here are some good Centrifugal Pumps if that's what your looking for. What kind of hook up are you doing, deep well, shallow well, out of lake, pond etc? The right pump for the job is the best one. How many gallons per minute do you need?

    bob...

  4. #4

    Default

    I'm told the well is about 65' to 70' deep. The yard medium size, not sure how many square feet. It has 2 zones, front and back. Each zone has about 18 sprinkler heads. They are the cheap popups from HD.

    Not sure what other information might be needed. Was thinking of going with a 1-1/2hp motor.

    Your thoughts..

    The centrifugal pump on that site is what we're looking for.

    Thanks..

  5. #5
    Previous member
    Join Date
    Jul 2005
    Location
    Riverview, Fl.
    Posts
    4,540

    Default

    You still haven't told me where the water is coming from. A well, a ditch, pond, river, lake. We need the depth to water from the source to the pump. We also need to know how many gallons per minute each of these heads use. That way we can figure out what size pump you need.

    Otherwise, we are shooting in the dark.

    bob...

  6. #6

    Default

    Its from a well. The well is about 65' to 70' deep.

    Each sprinkler head flows 3 gallons per minute.

    Zone 1
    Front yard
    4 full pattern @3 gpm.
    15 half pattern @ 1.5 gpm

    Zone 2
    Back yard
    8 full pattern @ 3 gpm
    6 half pattern @ 1.5 gpm


    Let me know if you need additional information..

  7. #7
    Previous member
    Join Date
    Jul 2005
    Location
    Riverview, Fl.
    Posts
    4,540

    Default

    We only need the water level in the well now. So your using 34 gallons per minute on each zone.

    Using 15 feet as a water level and 40 pounds of pressure, you would need a 1.5hp self priming Centrifugal Pump. If the water level is higher and you can get by with 30 - 35 psi, you might be able to get by with a 1hp.

    bob...

  8. #8

    Default

    Quote Originally Posted by speedbump View Post
    We only need the water level in the well now. So your using 34 gallons per minute on each zone.

    Using 15 feet as a water level and 40 pounds of pressure, you would need a 1.5hp self priming Centrifugal Pump. If the water level is higher and you can get by with 30 - 35 psi, you might be able to get by with a 1hp.

    bob...
    I'm thinking a submersible would be a better choice for a 70' well?

  9. #9
    Previous member
    Join Date
    Jul 2005
    Location
    Riverview, Fl.
    Posts
    4,540

    Default

    It depends on the water level and the horsepower you would need for that water level and that amount of water.

    With my 1.5hp 30 gpm sub, you are at the limit of the pump for that amount of water at 40 psi.

    Do you have a 4" or larger well? And where is the water level standing? How many feet from ground?

    bob...

  10. #10

    Default

    Speedbump: You sell Betta Flo pumps? Are you recommending.. SFLP150

  11. #11
    Previous member
    Join Date
    Jul 2005
    Location
    Riverview, Fl.
    Posts
    4,540

    Default

    Yes I sell Betta Flo and I was recommending the SFLP 150 if your water level is high enough.

    I only recommend self primers if your using them with a timer, not a pressure switch.

    bob...

  12. #12

    Default

    Yes...got a timer. Are the prices on the site current? Will see if I could find a pump locally. Maybe you could recommend a local vendor? I'm in Miami.

    Thanks for you input...

  13. #13
    Previous member
    Join Date
    Jul 2005
    Location
    Riverview, Fl.
    Posts
    4,540

    Default

    I'm about as local as it gets. I'm in Riverview, half way from you to Tallahassee. I really don't know who would sell them in Miami.

    bob...

  14. #14

    Default

    No problem...

    I have to do some research.... At least I know what to look for this time..

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •