(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 15 of 15

Thread: Need to find a wrench for this

Hybrid View

  1. #1
    DIY Senior Member Melissa2007B's Avatar
    Join Date
    Jun 2007
    Location
    Denver, CO
    Posts
    102

    Default Need to find a wrench for this

    We have this main line cleanout cap in the driveway and it's an inverted square. Dont they make a wrench that will open this?

    Melissa
    Denver Process Servers
    http://DenverProcessServers.net/

  2. #2
    Illinois Licensed Plumber SewerRatz's Avatar
    Join Date
    Nov 2008
    Location
    Chicago, IL
    Posts
    1,705

    Default

    We use two large screw drivers , stick each one in opposite corners crossing the blades and twist. There is a manufacture that makes square head tools for the counter sunk plug as well.

    Last edited by SewerRatz; 03-05-2009 at 03:18 PM.

  3. #3
    DIY Senior Member Melissa2007B's Avatar
    Join Date
    Jun 2007
    Location
    Denver, CO
    Posts
    102

    Default

    Quote Originally Posted by SewerRatz View Post
    We use two large screw drivers , stick each one in opposite corners crossing the blades and twist. There is a manufacture that makes square head tools for the counter sunk plug as well.

    Thanks. Any idea what they call that tool?
    Melissa
    Denver Process Servers
    http://DenverProcessServers.net/

  4. #4
    Illinois Licensed Plumber SewerRatz's Avatar
    Join Date
    Nov 2008
    Location
    Chicago, IL
    Posts
    1,705

    Default

    They call that tool a Eureka Cleanout Plug Wrench Lets see if this link works http://www.azpartsmaster.com/Product...__PAS4567.aspx

  5. #5
    DIY Senior Member Melissa2007B's Avatar
    Join Date
    Jun 2007
    Location
    Denver, CO
    Posts
    102

    Default

    Quote Originally Posted by SewerRatz View Post
    They call that tool a Eureka Cleanout Plug Wrench Lets see if this link works http://www.azpartsmaster.com/Product...__PAS4567.aspx
    Thank you!
    Melissa
    Denver Process Servers
    http://DenverProcessServers.net/

  6. #6
    Master Plumber master plumber mark's Avatar
    Join Date
    Feb 2005
    Location
    indianapolis indiana - land of the free, home of the brave....
    Posts
    4,243
    Blog Entries
    1

    Talking hammer and small cold chisel

    I always thought you were supposed to use a hammer and small chisel to open those up, slightly tapping in the right direction along the outer threads usually works ...

    but that is a neat tool....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •