Mrmichaeljmoore
Member
What type of routine maintenance should I be doing on my water softener?
Is there anything I should be doing to ensure the system lasts as long as it should?
I make sure the brine tank is full (no more than 1-2 bags of potassium chloride at a time to prevent any bridging)....
it regens when necessary (no more than 13 days between regenerations)...the system seems to be dialed in pretty good.
My system (installed in 2006) is 48,000 grain system with an Autotrol 255 valve head and the 762 processor. It has 1.5 cubic feet of C-249 ion exchange resin.
Thanks....just want to make sure I am not missing anything.
mike
Is there anything I should be doing to ensure the system lasts as long as it should?
I make sure the brine tank is full (no more than 1-2 bags of potassium chloride at a time to prevent any bridging)....
it regens when necessary (no more than 13 days between regenerations)...the system seems to be dialed in pretty good.
My system (installed in 2006) is 48,000 grain system with an Autotrol 255 valve head and the 762 processor. It has 1.5 cubic feet of C-249 ion exchange resin.
Thanks....just want to make sure I am not missing anything.
mike