Need advice on sprinkler valve

Users who are viewing this thread

Thurman

New Member
Messages
9
Reaction score
0
Points
0
Does any manufacturer make a 12v DC operated sprinkler (water)control valve that is 1 1/4" NFPT ported on both ends? My local big box stores certainly don't have them and before I go running around searching I thought I would ask. Thanks, David
 

Jimbo

Plumber
Messages
8,918
Reaction score
18
Points
0
Location
San Diego, CA
You could easily use a 1½" valve an bush down to the 1 1/4". The bigger problem is why do you need to operate on 12 VDC?? Seems almost all irrigation valves are 24 VAC.
 

Wet_Boots

Sprinkler Guy
Messages
799
Reaction score
2
Points
16
Location
Metro NYC
What is the water pressure at this valve? There might be a standard valve that will work.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks