I just wanted to confirm, in the attached picture the valve on the 1" inlet is CLOSED, is this correct? The arrow on top is pointing away from the meter. The two holes that are lined up to place a lock or seal thru wold lock it in the closed position, is that right?
I would rotate counter-clockwise to open, is that correct, or can it trun either way? Rotate 90º for full open? Does it look like there would be a corresponging hole to lock it in the open position if desired? I don't think so.
Thanks for the info.
I would rotate counter-clockwise to open, is that correct, or can it trun either way? Rotate 90º for full open? Does it look like there would be a corresponging hole to lock it in the open position if desired? I don't think so.
Thanks for the info.