(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Delta Multi Choice Valve

Hybrid View

  1. #1

    Default Delta Multi Choice Valve

    installing a Delta T13490 Multi Choice Valve in a rental tub/shower .......new from Home Depot.....won't shut off..............help!!!!!!

    Yes I don't know what I'm doing

  2. #2
    DIY Senior Member CarlH's Avatar
    Join Date
    Feb 2007
    Location
    Northern VA
    Posts
    175

    Default

    Did you do any soldering with the cartridge installed? If so, you might have a heat damaged cartridge. The key here should be the cartridge. That is what controls the flow of water. Check the O-rings and check the seats for damage and if they are in their proper place. Did you disassmble the cartridge at all? Lastly, have you installed the handle or knob and tried turning it? I'm not sure, but it may be possible that the stop that limits the travel of the knob/handle could be another cause if it is not installed properly. I think there should be a drawing included with that package what would help you identify the parts.
    Last edited by CarlH; 02-16-2009 at 05:34 PM. Reason: clarity

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    I don't know how the set you purchased was packaged. T...indicates a trim kit.

    The R10000 rough in valve, by itself, comes with just a blank cap. The water will run continuously unless you purchase separately a plug.

    Now, did you install the proper cartridge in your valve body??


    Also, your model, apparently an old one, is listed on this "multi choice alert": http://www.deltafaucet.com/customersupport/alert.html
    Last edited by jimbo; 02-16-2009 at 07:36 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •