(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Adding Circuits using ROMEX® vs. AC cable

Threaded View

  1. #1

    Default Adding Circuits using ROMEX® vs. AC cable

    My house was built using AC cable (w/bonding strip). I am now refinishing my basement and would like to add circuits from the fuse box using ROMEX®/NM....I have found working w/ROMEX® to be much easier/cheaper. Is this allowed code wise? If so how do I ground the ROMEX®/NM in the fuse box?
    Sorry for the repost.
    Last edited by Terry; 12-07-2011 at 10:28 AM.

Similar Threads

  1. ROMEX®/cable color changes
    By taz110 in forum Electrical Forum discussion & Blog
    Replies: 33
    Last Post: 09-08-2013, 10:28 AM
  2. 15 amp and 20 amp circuits in same box
    By LHO in forum Electrical Forum discussion & Blog
    Replies: 14
    Last Post: 10-26-2011, 08:23 AM
  3. two circuits in one box?
    By tregg in forum Electrical Forum discussion & Blog
    Replies: 2
    Last Post: 07-13-2010, 06:18 PM
  4. Cable Drain (long cable needed)
    By dick2222 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 2
    Last Post: 06-11-2009, 07:03 PM
  5. New Kitchen Circuits Using 12-3
    By DrummerDad in forum Electrical Forum discussion & Blog
    Replies: 4
    Last Post: 07-25-2007, 10:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •