See anything wrong with this design

Users who are viewing this thread

spresco

New Member
Messages
13
Reaction score
0
Points
1
Location
Oklahoma
Anybody see anything wrong with the attached DWV plan? This is just the elevation view but it tells most of the story. Trying to drain a washing machine and kitchen sink into an existing 2" drain line. The kitchen sink is located on a pony wall that connects to a full wall so the vent for the sink cannot be higher than 30" but the vent does terminate into the vent stack
24" above the drain line for the washing machine. The washing machine standpipe is 5' away from the vent stack.
 

Attachments

  • Plumbing elevation.jpg
    Plumbing elevation.jpg
    28.6 KB · Views: 287
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks