soonergirl99
New Member
We installed a Bosch 1600H (natural gas) yesterday. When we first tried to start it we would get a spark but it would not light (the green light would not come on). After about 10-15 minutes of trying different faucets we now no longer get a spark.
We know it is getting gas. We reduced the gas flow into the unit from 3/4" to 1/2" because of existing pipes from the previous, very old, standard hot water tank. Could this be part of the problem? If not, what else could be wrong?
Thanks!
We know it is getting gas. We reduced the gas flow into the unit from 3/4" to 1/2" because of existing pipes from the previous, very old, standard hot water tank. Could this be part of the problem? If not, what else could be wrong?
Thanks!