(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Toto Unifit compatability question

Hybrid View

  1. #1
    DIY Junior Member wot2000's Avatar
    Join Date
    Jan 2009
    Location
    NC
    Posts
    6

    Default Toto Unifit compatability question

    Hi everyone. I will be installing a Toto Soiree soon, and need a 10" UniFit rough-in adapter.

    Toto specs a TSU03W.xx for the Soiree. I think the one I have is a TSU01W.10. Does anyone know the difference between the "01" and "03" UniFit? Perhaps it would work, but the 10" alignment would just be off a little? That could actually be good, since my "Rough-In" is around 10.75".

    Thanks for any advice.
    -WC
    Last edited by Terry; 01-25-2009 at 08:12 AM.

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,201
    Blog Entries
    1

    Default

    The only difference is the bolts that come in the box.
    Just use the bolts that came with the toilet with the 10" kit that you bought.
    The bolts for the Soiree and the Guinevere are a bit shorter.
    The plastic part is the same.



    Last edited by Terry; 06-19-2009 at 08:46 PM.

  3. #3
    DIY Junior Member wot2000's Avatar
    Join Date
    Jan 2009
    Location
    NC
    Posts
    6

    Default

    Wow, Thanks for the prompt response, Terry! I see you edited my post... sorry, didn't realize I was going against the rules mentioning that place.

    Wish I knew of someone as competent and concerned as yourself here locally -- I'd hire them for the install. But I'm in a 7 year old house with more plumbing mistakes than I can mention. Sadly the "pros" here do not seem to be.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •